| Superlum Broadlighter Companion Software |
|
Superlum Broadlighter Companion
Software enables you to operate your Broadlighter remotely from
your PC/laptop using the standard RS-232 interface. This
page provides detailed instructions on how to download and install the
latest version of the software. Please contact our support team if you
have any problems downloading or installing the software.
|
|
Overview |
| |
|
The program interface mostly duplicates
the indicators and push-buttons on the Broadlighter's front panel. You
can remotely turn on/off each SLD individually or all SLDs at once and
monitor the state of front panel indicators.
|
|
System Requirements |
| |
|
Operating system: Windows 95, 95 OSR2, 98, or 98 SE, Windows ME,
Windows NT Workstation 4.0 Service Pack 3, Windows 2000 Professional, Windows XP Professional,
Memory: 32 MB for Windows 9x and ME, 64 MB for Windows NT and
128 MB for Windows 2000 and XP,
Processor: Pentium 100 MHz (or faster) processor,
Hard disk space: 2MB of free hard disk space.
|
|
Download software |
| |
|
Click the Download button below to start the download.
File name: Companion_1_0_1_Setup.exe
Version: 1.0.1
Language: English
Size: 1186631 Bytes
MD5 Hash: 0A56C116A744A37BEA54E2E46EE65020
|
|
Installation instructions |
| |
|
To use this program you have to install it and connect the Broadlighter
to your computer. Please use a 9 pin to 9 pin or 9 pin to 25 pin null modem
cable to connect the Broadlighter to your computer.
CAUTION:
Always turn off all electrical power to the computer and to the Broadlighter before connecting or disconnecting the RS-232 cable.
You can install the program either from CD or from web download.
To install from a CD, insert the CD-ROM. If autorun is enabled, the installer will begin automatically.
Otherwise, double-click the setup.exe file on the CD-ROM to start the setup program.
To install from a Web download, you will download the Companion_1_0_1_Setup.exe file
from this page by clicking the Download button above.
Double-click the file you downloaded and the installation will begin automatically.
Follow the on-screen instructions in the setup program.
Setup program will copy program files to your hard drive and create shortcuts on the desktop and in the programs menu.
When you launch the program for the first time a 'settings' window will appear.
Select the name of the COM port to which you are connecting the Broadlighter and press the OK button.
|
| |
↑ Back to top
|
|
